| Customization: | Available |
|---|---|
| Fiberglass Type: | E-Glass |
| Certification: | ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
UNION, as a professional in the resin and fibreglass industry, sincerely recommends our SMC(sheet moulding compound) product range. UNION cherishes any opportunity to customize and protect your exclusive SMC formulations.Trial orders and samples are available, please don't hesitate to contact us.
On the basis of unsaturated polyester resins, and glass fibre reinforced, Our SMC has excellent physical and mechanical properties with uniform hardness, good peelability and is convenient to cut. Colors can be customized. It neither contains any halogens nor any of the candidate substances in the REACH SVHC list.
The 6006SX is mainly applied to assembled water tank panels, bodies, structural components, etc
| Item | Unit | technical index | test method |
| Glass fiber content | % | 33±2 | GB15568-2024 |
| linear shrinkage | % | 0.10-0.15 | GB15568-2024 |
| water absorption | % | ≤0.2 | GB/T 1462-2005 |
| tensile strength | MPa | ≥80 | GB/T 1447-2005 |
| Tensile strength modulus | GPa | ≥10 | GB/T 1447-2005 |
| flexural strength | MPa | ≥190 | GB/T 1449-2005 |
| flexural modulus | GPa | ≥12 | GB/T 1449-2005 |
| impact strength | KJ/m2 | ≥75 | GB/T 1451-2005 |
| density | g/cm 3 | 1.75-1.85 | GB/T 1033.1-2008 |
1. Pressing time: In principle, the product thickness is per 1mm about 1min. It can be adjusted according to the actual situation.
2. Pressing temperature: Front ( bright side of the product)/reverse side: 146- 150ºC/138- 142°C .
Note: This temperature is the mold surface temperature.
3. Forming pressure: It is recommended to calculate 1000 tons of pressure per square meter based on the projected area of the product. It can also be adjusted according to the actual situation.
1. Our packaging is: 1 ton/pallet (±5% difference), sealed with multi-layer PP film packaging, plus aluminium-plated film to prevent the Light Source. The outer layer is packed in multi-layer cartons and fumigation-free pallets. For other packing , please contact our technicians.
2. When transporting, it should comply with the regulations on transportation safety in Chapter 5 of the State Council's" Regulations on the Safety Management of Hazardous Chemicals". Protect from the sun and rain.
3. Stored in and keep in a cool, ventilated and dry place below 25°C, avoid fire, keep away from heat and radiation sources, avoid water and prohibit exposure to sunlight and open storage. Under the above storage conditions, from the date of manufacture, SMC storage period is 6 months .
){kind=link}