Epoxy Resin for Winding Pipe

• Customization: Available
• Molecular Principal Chain: Other
• Color: Colorless Transparent
• Model NO.: 323A
• Shelf Time: 1 Year
• Appearance: Colorless Transparent Liquid
• Transport Package: Drum
• Specification: A Grade Quality
• Origin: China
• HS Code: 35069120
• Production Capacity: 10000ton/Year

Product Description

Product Description

 

Epoxy Resin For Winding Pipe is specially developed for pipe winding. It has low mix viscosity, g ood impregnation with fiber. The laminate has good tenacity, acid and alkali resistan ce, heat resistance, and mechanical performance. It's suitable for pipe winding and a ccessories, also can be used for infusion.
323A epoxy resin
 
Character:

Features	Unit	Index	Test method
Appearance	-	Colorless transparent	Visual
		liquid
Viscosity 25ºC	mPa.s	11000-15000	ASTM D2196
Proportion 25ºC	g/cm3	1.16	ASTM D792
Non-volatile portion	%	≥99	ASTM D1579

323B-1(curing agent)
 
1.Character:

Features	Unit	Index	Test method
Appearance	-	Brown liquid	Visual
Viscosity 40ºC	cps	5000~9000	ASTM D2196
Proportion 20ºC	g/cm3	1.18 ±0.01	ASTM D792
Non-volatile portion	%	100	ASTM D1579
Mixture ratio(PHR)	weight	30	-
2.Technological parameter
The initial mixture viscosity	cps/40ºC	3000~5000	ASTM D2196
Operating time 100g/ 25ºC	hrs	1~1.5	GB12007.7-1989
3.After curing performance
Curing conditions	--	80ºC*2h+160ºC*2h	Test method
Glass transition temperature	ºC	155~165	ISO 11357
Hardness	shore D	85~90	ASTM D2240
The bending strength	kgf/cm2	820~900	ASTM D790
Bending elasticity rate	kgf/cm2	75000~80000	ASTM D790
Tensile strength	kgf/cm2	600~650	ASTM D638

 
 
323B-2
 
1.Character:

Features	Unit	Index	Test method
Appearance	-	Brown liquid	Visual
Viscosity  25ºC	cps	100~300	ASTM D2196
Proportion 20ºC	g/cm³	1.18±0.01	ASTM D792
Non-volatile portion	%	100	ASTM D1579
Mixture ratio (PHR)	weight	50	-
2.Technological parameter
The initial mixture viscosity	cps/25ºC	1300~2000	ASTM D2196
Operating time	mins	35~40	GB12007.7-1989
3.After curing performance
Curing conditions		80ºC*2h+130ºC*2h	Test method
Glass transition temperature	ºC	110~120	ISO 11357
Hardness	shore D	85~90	ASTM D2240
The bending strength	kgf/cm²	700~800	ASTM D695
Bending elasticity rate	kgf/cm²	760~840	ASTM D790
Tensile strength	kgf/cm²	450~520	ASTM D638
Bibulous rate23ºC 24H	%	<0.2	ISO 175-2000

 
 
323B-3
 
1.Character:

Features	Unit	Index	Test method
Appearance	-	Brown liquid	Visual
Viscosity 25ºC	cps	100~300	ASTM D2196
Proportion 20ºC	g/cm³	1.18±0.01	ASTM D792
Non-volatile portion	%	100	ASTM D1579
Mixture ratio (PHR)	weight	50	-
2.Technological parameter
The initial mixture viscosity	cps/25ºC	1300~2000	ASTM D2196
Operating time	hrs	6~7	GB12007.7-1989
3.After curing performance
Curing conditions		80ºC*2h+140ºC*2h	Test method
Glass transition temperature	ºC	110~120	ISO 11357
Hardness	shore D	85~90	ASTM D2240
The bending strength	kgf/cm²	700~800	ASTM D695
Bending elasticity rate	kgf/cm²	760~840	ASTM D790
Tensile strength	kgf/cm²	450~520	ASTM D638
Bibulous rate23ºC 24H	%	<0.2	ISO 175-2000

 
4.Use and curing process:
A.Preparation: molding with cloth or blanket, to advance after surface treatment, as far as possible choose after pretreatment of fiber reinforced material, no matter what kind of fiber and metal products, before use must keep dry, don't be stained with oil. 
B.mixture: mix 323A epoxy resin with 323B curing agent in the correct proportion(weight ratio), 323A epoxy resin(suggest 40 ºC for one hour to preheat in 
winter), please hold the agitator in vertical when stirring, stir the mixture for 2-3mins in the same direction like clockwise (or counterclockwise), to minimize the stir the air into the mixture.
 
Note: mixture must be stirred very well at the bottom of the container and the edge, otherwise some place will not be cured.
 
Please use the mixture within the suitable time. Note the suitable time will be reduced along with the temperature rising. The operating time in summer is the half . The operating time of the drippy mixture when winding will be shorten.
 
please returned immediately and used up, otherwise will affect the impregnation of
the fiber.
 
C.The shaping and curing: process molding and curing as required. It can be released after cool.
 
D.Cleaning and maintenance: to clean all the tools and equipment after completion of the work every day with organic solvents such as acetone
 

Detailed Photos

 

Applications

 

 

Give us a chance, and we' ll return you with satisfaction.