| Customization: | Available |
|---|---|
| Material: | Metal |
| Blade Material: | Plastic |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
U10W
The U10W series axial flow fans is part product of ?,These fans are available in a wide range of application including HVAC,Compressors,Motor and Engine driven equipment,the blade size is designed to ensure that the flow rate of the airflow through the blade remains very uniform throughout the blade's surface to achieve optimum fan performance.The fan has the following advantages over a one-time injection or stamping fan:
1.More efficient
2.Less absorbed power
3.Low noise
The fan diameter ranges from 180 to 700mm,and the blade twist angle can be adjusted from 20°to 50°to meet the different application requirement of the customer.The root is locked in the fan hub by a plastic fixing pin,which ensures that the blade will not be displaced after installation and the twist angle remains unchanged.blade molded from high-strength thermoplastic materials or die-cast from a aluminum alloys have the following advantages:
1.Light weight High strength
2.Preservative
3.Customization
Blade Material
| Symbol | Material | Temperature range | Characteristic | Application |
| PA | Nylon6,Black | -40ºC-110ºC | Anti-aging | Standard load |
| PAG | Nylon6,Black and white | -40ºC-110ºC | Anti-aging | Heavy load |
| PAGST | Nylon6,Black | -40ºC-110ºC | Shock and impact | Strong vilbration occasion |
| PACAS | Nylon6,Blue-gray | -30ºC-100ºC | Conductivity Fire resistance | Explosive danger |
| ALU | Die-cast aluminum alloy | -40ºC-150ºC | Large temperature range | High temperature |
| U10W Blade number | Fan diameter mm (Minimum-Maximum) | ||
| S4Z | S5Z | S6Z | |
| 6 | 412 - 536 | 560 - 748 | 732 - 1002 |
| 7 | 478 - 615 | 621 - 813 | 790 - 1060 |
| 8 | 422 - 550 | 570 - 760 | 738 - 1008 |
| 10 | 491 - 630 | 633 - 828 | 802 - 1072 |
1.Same quality as wingfan and multiwing
2.Software to design the model
3.Full sets of blade and hub
){kind=link}