Jushi 440 Assembled 4400 Tex Fiberglass SMC Roving for Electrical Components/ Automobile Parts

• Customization: Available
• Certification: CE, ISO
• Technique: Assembled Roving
• Model NO.: ER14-2400/4400/4800-440
• Surface Treatment: Silane Sizing
• Fiberglass Type: E-Glass
• Roving Type: Chopped Roving
• Roll Weight: 17.5kg
• Loss of Ignition: 1.25%
• Filament Diameter: 14/15/16um
• Glass Type: E Glass
• Compatible Resin: up Resin, Vinyl Ester Resin
• Sizing Type: Saline
• Typical Liner Density: 2400, 4400, 4800 Tex
• Transport Package: Roll with Pallet
• Specification: A grade Quality
• Trademark: union
• Origin: China
• HS Code: 70191200
• Production Capacity: 30000 Ton/Year

Product Description

 

Product Description

Fiberglass 440 is a general purpose SMC roving coated with a silane-based sizing compatible with unsaturated polyester and vinyl ester resins.
440 is suitable for use in producing low and ultra-low shrinkage sheets to be incorporated typically in automotive parts, door skins, water tanks and electrical components.
 

Product Parameters

 

Glass type	E
Sizing type	Silane
Typical filament diameter (um)	14/15/16
Typical linear density (tex)	2400/4400/4800
Example	ER14-2400-440

 

Item	Linear density variation	Moisture content	Sizing content	Stiffness
Unit	%	%	%	mm
Test method	ISO 1889	ISO 3344	ISO 1887	ISO 3375
Standard range	± 4	≤ 0.07	1.25 ± 0.15	160 ± 20(14-15UM)

Instructions

·The product is best used within 12 months after production, and should be kept in the original package before use.

·Care should be taken when using the product to prevent it from being scratched or damaged.

·The temperature and humidity of the product should be conditioned to be close or equal to the ambient temperature and

humidity before use, and the ambient temperature and humidity should be properly controlled during the use.

·The cutter rollers and rubber rollers should be maintained regularly.

Packaging & Shipping

Storage

Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.The best temperature

and humidity should be maintained at -10ºC~35ºC and ≤80% respectively. To ensure safety and avoid damage to the product, the

pallets should be stacked not more than three layers high. When the pallets are stacked in two or three layers, special care

should be taken to correctly and smoothly move the upper pallet.

Detailed Photos

Give us a chance, and we' ll return you with satisfaction.