| Customization: | Available |
|---|---|
| CAS No.: | 90-72-2 |
| Formula: | C15h27n3o |
|
Still deciding? Get samples of US$ 3.5/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The product contains phenolic hydroxyl group in its molecular structure, which is mainly used as a curing accelerator of epoxy resin adhesives to promote the complete curing of epoxy resin in a relatively short time. It has obvious promotion effect on the high temperature curing epoxy resin system, and can appropriately improve the bonding strength. The epoxy resin coating can be quickly cured at room temperature or low temperature curing as casting parts, seals, etc., and can be used as the accelerator of acid anhydride curing agent and amide curing agent.
The dosage of this product as an acid anhydride curing agent and the ratio of epoxy resin (E44 as an example) is about 1:10, and can also be mixed with other epoxy curing agents to promote the effect and improve the curing rate, the dosage of main curing agent is 0.3-5%, the applicable curing agent: amine, acid anhydride, low molecular weight polyamide curing agent.
Protection Performance:
1.Increased activity
2.Rapid curing
| As an antioxidant, it is also used in dye preparation Used as curing agent of thermosetting epoxy resin and curing accelerator of other resins, as well as curing agent of ship bottom coatings and architectural coatings, reference dosage 0.1 ~ 3 parts (mass number). It is also used as a sealant, adhesive and acid neutralizer for laminate materials and floors. It is used as a catalyst in the synthesis of polyurethane. Widely used in epoxy resin electronic pot-sealing materials, encapsulation materials and epoxy floor coatings, anti-corrosion coatings as accelerators, in addition, the catalyst is a polyisocyanurate (PIR) reaction catalyst, PIR reaction catalytic selective activity is higher than PUR, so it is more used in the formulation of polyisocyanurate reaction. Its characteristics can help the foaming rise curve become regular, good fluidity, suitable for the injection mold reaction of polyisocyanurate. The product is weaker The amount of active catalyst in the formulation is large, the reaction is moderate, the rise is stable, and the flow is good. The obtained products have PIR high temperature resistance and fire resistance. It can be used to prepare polyurethane foam composites. |
Welcome to inquiry!
){kind=link}